| Customization: | Available |
|---|---|
| CAS No.: | / |
| Formula: | / |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Chemical Nature |
This strain is made of polyether as the main raw material and refined with various active additives. Due to the large gas content of polycarboxylic acid mother liquor itself, the appearance of concrete bubbles is more and more uneven. The addition of this defoamer can eliminate the excess large bubbles in the concrete without affecting the beneficial bubbles produced by the water reducing agent. It can not only improve the structure of concrete holes and the degree of compaction, but also control the slump loss of concrete, better control the problems of concrete entrain, slow setting, bleeding and so on, and become an indispensable component in the concrete mix ratio. The defoamer does not break milk, does not bleach oil, has excellent alkaline resistance, fast defoaming, lasting foam suppression, and will not cause any pollution to the environment.
|
| Features of application | 1, can effectively reduce the formation of bubbles and foam in concrete, mortar and other building materials. 2, good high temperature resistance 3, broad acid and alkaline resistance, especially suitable for anti-foaming and anti-foaming under alkaline conditions. 4, excellent high temperature resistance and shear ability. 5, excellent anti-foam and anti-foam performance, can play a role in very low concentration. |
| Usage | Used in the production of cement mortar, water reducing agent, concrete, and other production process of defoaming. Directly into the foaming system, before use must be stirred evenly, this product can be directly added or sprayed to use, can be diluted with water after use (need to use immediately), the general recommendation to add the amount of the total product is 0.1% ~ 0.5%, the amount should be adjusted by the user according to the test. |
| Packaging | 25 kg / 55 lb paper bag |
| Storage condition |
The product should be stored in a dry, clean environment, in its original packaging and away from heat sources. This product is not easy to fail, but it is a hydrophilic product, if the storage environment is poor, it will slowly inhale water, it is recommended to follow the principle of first in first out when using. If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion.
|
| Product safety | According to the legal provisions on dangerous goods and preparations, this product is non-hazardous. Avoid dust formation and accumulation. Scattered effects should be swept up while keeping them dry. Touching with water will cause a risk of slipping. Contact us for further information. |
| General | The usual safety precautions when handling chemicals must be observed. These include the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles. |
| Material Safety Data Sheet | All safety information is provided in the Material Safety Data Sheet for Polyether Liquid |
| Transport Regulation | Not known as a dangerous good according to transport regulations. |
|
1
|
This product is packed in 25kg bags out HDPE bags inner with LDPE bags.
|
|
2
|
Store products with original packaging in a dry, clean environment and away from heat sources. This product is not easy to lose efficacy, but it is hydrophilic-based. If the storage environment is poor, it will slowly absorb moisture. It is recommended to follow the first-in-first-out principle when using it. The packaging must be tightly sealed to prevent moisture intrusion if not finished use.
|
){kind=link}