| Customization: | Available |
|---|---|
| CAS No.: | 9004-65-3 |
| Formula: | / |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Chemical Nature | PCE128 is a polycarboxylate water-reducing agent powder produced through a high-temperature powder spraying process. It has an ultra-high water-reducing effect and is suitable for cement-based mortar or ready-mixed concrete with high fluidity and strength requirements. |
||||||||||||
| Typical Properties |
|
||||||||||||
| Features of application | 1. PCE128 can make the water-reducing rate of mortar reach more than 25%, which significantly improves the fluidity of mortar when the same amount of water is added. 2. The product has wide adaptability and is suitable for most mortars and concrete products. It can be widely used in various mortars (such as grouting materials, bearing mortars, and other materials). Improve the fluidity of mortar slurry, facilitate construction, and improve construction efficiency; 3. The product is environmental protection, non-toxic and harmless; 4. PCE-128 is compatible with other external additives such as a defoamer, retarder, expansion agent, early strength agent, etc. |
||||||||||||
| Usage | Pre-mix evenly with other dry powder components before packaging. Mix and use on-site according to the recommended amount of water. The recommended addition amount is 0.01%-0.30% of the cementitious material, which must be pre-tested according to the raw materials and construction specifications before use. |
||||||||||||
| Packaging | 25 kg / 55 lb paper bag |
||||||||||||
| Storage condition | Store products with original packaging in a dry, clean environment and away from heat sources. This product is not easy to lose efficacy, but it is hydrophilic-based. If the storage environment is poor, it will slowly absorb moisture. It is recommended to follow the first-in-first-out principle when using it. The packaging must be tightly sealed to prevent moisture intrusion if not finished use. |
||||||||||||
| Product safety | According to the legal provisions on dangerous goods and preparations, this product is non-hazardous. Avoid dust formation and accumulation. Scattered effects should be swept up while keeping them dry. Touching with water will cause a risk of slipping. Contact us for further information. |
||||||||||||
| General | The usual safety precautions when handling chemicals must be observed. These include the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles. |
||||||||||||
| Material Safety Data Sheet | All safety information is provided in the Material Safety Data Sheet for Polycarboxylate superplasticizer. |
||||||||||||
| Transport Regulation | Not known as a dangerous good according to transport regulations. |
|
1
|
This product is packed in 25kg bags out HDPE bags inner with LDPE bags.
|
|
2
|
Store products with original packaging in a dry, clean environment and away from heat sources. This product is not easy to lose efficacy, but it is hydrophilic-based. If the storage environment is poor, it will slowly absorb moisture. It is recommended to follow the first-in-first-out principle when using it. The packaging must be tightly sealed to prevent moisture intrusion if not finished use.
|
){kind=link}