Premium Steel Fiber for Ultra-High Performance Concrete Reinforcement

• Customization: Available
• Application: Construction
• Bonding Strength: /
• Model NO.: Steel Fiber
• Setting Time: /
• Type: Concrete Fiber
• Transport Package: Bag
• Specification: 20 kg/bag
• Trademark: sidleychem
• Origin: China
• Production Capacity: 600ton/Month

Product Description

Concrete Fiber
Steel Fiber
Loose Hooked End Steel Fiber
Glued Hooked End Steel Fiber

Chemical Nature

The design of end hooks at both ends of steel fiber is the best anchoring design, which slowly deforms in the process of drawing, thus enhancing the binding force between hooked steel fiber and concrete.
Hooked steel fibre is made of high-quality wire by cold drawing, and its tensile strength is greater than 1100MPa, which ensures extremely small tolerance and high tensile strength.

Typical Properties

Products	Diameter	Length	L/D ratio	TS	Type
SC-05030	0.50mm	30mm	60	>1150MPa	Loose/Glued
SC-05530	0.55mm	55mm	55	>1150MPa	Loose/Glued
SC-05035	0.50mm	50mm	70	>1150MPa	Loose/Glued
SC-05535	0.55mm	35mm	64	>1150MPa	Loose/Glued
SC-07550	0.75mm	50mm	67	>1150MPa	Loose/Glued
SC-07560	0.75mm	60mm	80	>1150MPa	Loose/Glued
SC-09050	0.90mm	50mm	56	>1150MPa	Loose/Glued
SC-09060	0.90mm	60mm	67	>1150MPa	Loose/Glued
SC-10050	1.00mm	50mm	50	>1150MPa	Loose/Glued

Features of application

This fiber is a new material of concrete reinforcement, it is made of copper coated cold-drawn wire.it is widely adopted in high-quality industrial floors, tunnel and bridge surface applications. After mixing with these reinforced glued steel fibers, the concrete has perfect flex resistance and shear strength.
 

Usage

Dosage: depend on the application and minimum dosage is 20kg/m³-70kg/m³
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
 

Packaging

20 kg /  bag

 

Storage condition

Store products with original packaging in a dry, clean environment and away from oxidizing materials and strong acids.
 

Product safety

According to the legal provisions on dangerous goods and preparations, this product is non-hazardous.
 

General

No special handling required.
 

Material Safety Data Sheet

All safety information is provided in the Material Safety Data Sheet for Steel fiber
 

Transport Regulation

Not known as a dangerous good according to transport regulations.

 

 

 

 

 

 

 

Company Profile
 

SIDLEYCHEM has extensive experience in the production of concrete admixtures. Wecan adjust the synthesis process according to the customer's needs and provide solutionsfor different materials and climates.

SIDLEYCHEM has a professional concrete laboratory, which can help customers optimizethe proportion of C60/C80/C100 strength concrete, reduce costs and the strength stillmeet the technical requirements of the concrete. SIDLEYCHEM to provide customerswith professional, customized one-stop product supply services and systemized solutions.whatever suits you is the best product.

Belonging to the anionic type,it is a high efficiency water reducing agent with early strength,non air entraining and low chloride ion content.it has excellent workability,which is not easy to sag and can significantly improve the compactness and surface gloss of the material.