High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete

Product Details
Customization: Available
Appearance: White Transparent Liquid
Application: Concrete Admixture, Grouting Material
Still deciding? Get samples of US$ 0.5/Bag
Request Sample

360° Virtual Tour

Diamond Member Since 2019

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
18
Year of Establishment
2005-10-24
Management System Certification
ISO 9001
  • High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
  • High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
  • High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
  • High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
  • High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
  • High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
Find Similar Products

Basic Info.

Model NO.
PCE-154L
Setting Time
Rapid Setting Time
Type
Ultra-high-range Water-reducing Agent
Water Reduction Rate
40%-50%
Transport Package
Drum/IBC
Specification
200kg Drum/1000kg IBC
Trademark
sidleychem
Origin
China
HS Code
3824401000
Production Capacity
600ton/Month

Product Description

Mother Liquor
Polycarboxylate Superplasticizer
PCE-154L
Chemical Nature
PCE154L is a new generation of environmentally friendly polycarboxylate high-performance water-reducing agent. The series of water-reducing agents can significantly improve the plasticity index of fresh concrete due to its high water-reducing rate, thus improving the pumping and reliability of concrete while also showing excellent performance in strength growth.
This product can be widely used in ordinary concrete, pumped concrete, superfluid self-compacting, and high-strength and high-durability concrete, especially in precast concrete applications.

 
Typical Properties  
Appearance White transparent liquid
Solid content 50±2%
PH 5±2
Density/(g/cm³) 1.05±0.05(25ºC)
Chlorine content  0
ASTM C 494 type F,G
Standard compliance: ASTM C 494, Type E, F and G standard for high range water reducer
Features of application
1. The product is light yellow or colorless liquid;
2. The product has good stability and no precipitation at low temperatures;
3. The product is environmentally friendly, non-toxic, and harmless and is conducive to the deployment of environmental concrete;
4. The product has excellent adaptability while taking into account the characteristics of high water reduction;
5. Stable product quality and performance ;
6. Excellent solubility;

 
Usage
1. Low dosage and high water-reducing rate. The recommended dosage is 0.2-0.5% (solid content) of the cementitious material, and the water-reducing rate can reach 25-40%; it is not an end product used in concrete production since the product is a water-reducing stock solution with a solid content of 50%. Recommend customers reduce the solid content of the product before use and determine the optimal dosage and performance through experiments. Other admixture products can be used in combination if necessary.
2. When users first use the product or change raw materials, please refer to the instructions according to the construction requirements plus conditions and conduct necessary trial mixing tests on the dosage along with methods to obtain the best technical and economic benefits;
3. The product cannot be mixed with a Naphthalene water-reducing agent to avoid affecting the performance.

 
Packaging
200kg DRUM/1000KG IBC
Storage condition
1. The product is transported in plastic barrels or tankers and can also be packaged in unique ways according to customer requirements;
2. The product is non-toxic and non-flammable;
3. The product should be stored in a cool place and avoid long-term contact with steel items. It should be kept covered and protected from sunlight, rain, and freezing. The storage temperature should be between 0-40ºC and below 0ºC. There will be freezing during storage. Heat it until it melts and stir evenly again before use if ice is found;
4. The shelf life of the product is six months. If it exceeds, it can only be used after passing the technical index inspection and confirming that its performance meets the requirements through concrete trial mix verification.

 
Product safety
According to the legal provisions on dangerous goods and preparations, this product is non-hazardous. Touching with water will cause a risk of slipping. Contact us for further information.
 
General
The  usual  safety  precautions  when  handling  chemicals  must  be  observed.  These  include  the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles.
 
Material Safety Data Sheet
All safety information is provided in the Material Safety Data Sheet for Polycarboxylate superplasticizer.
 
Transport Regulation
Not known as a dangerous good according to transport regulations.
 
Important

The  descriptions,  designs,  and  data  contained  herein  are  presented  for  your  guidance  only. Because there are many factors under your control which may affect processing or application/use it is necessary for you to make appropriate tests to determine whether the product is suitable for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,   INCLUDING   WARRANTIES    OF    MERCHANTABILITY    OR    FITNESS   FOR   A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, OR INFORMATION SET FORTH,   OR THAT THE PRODUCTS, DESIGNS, OR DATA   MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, DATA OR DESIGNS PROVIDED BE PRESUMED TO BE A PART OF OUR TERMS AND CONDITIONS OF SALE. Further, you expressly understand and agree that the descriptions, designs, and data furnished by SIDLEYCHEM hereunder are given gratis and SIDLEYCHEM assumes no obligation or liability for same or results obtained from use thereof, all such being given to you and accepted by you at your risk.




High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
 
Company Profile
 
SIDLEYCHEM has extensive experience in the production of concrete admixtures. Wecan adjust the synthesis process according to the customer's needs and provide solutionsfor different materials and climates.

SIDLEYCHEM has a professional concrete laboratory, which can help customers optimizethe proportion of C60/C80/C100 strength concrete, reduce costs and the strength stillmeet the technical requirements of the concrete. SIDLEYCHEM to provide customerswith professional, customized one-stop product supply services and systemized solutions.whatever suits you is the best product.

Belonging to the anionic type,it is a high efficiency water reducing agent with early strength,non air entraining and low chloride ion content.it has excellent workability,which is not easy to sag and can significantly improve the compactness and surface gloss of the material.
High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
 
High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete
High-Performance Liquified Concrete Additive Water-Reducing Agent Polycarboxylate Superplasticizer PCE-154L for Precast Concrete





 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier