Polycarboxylate Ether Superplasticizer Liquid

• Customization: Available
• Chemical Composition: Polycarboxylate Ether
• Type: water-reducing admixture
• Model NO.: PCE-156B
• Transport Package: Drum
• Specification: 200kg DRUM/1000KG IBC
• Trademark: Sidleychem
• Origin: China
• HS Code: 3824401000
• Production Capacity: 5000ton/Year

Product Description

Chemical Nature

 

PCE-156B is a new generation of environmentally friendly polycarboxylate high-performance slump retaining agent, which has the remarkable characteristics of slow release and water reduction, greatly improves the long-term maintenance of concrete slump, and can significantly improve the plastic retaining effect of concrete, especially in pumped concrete

Typical Properties

 

appearance	White transparent liquid
solid content	50±2%
PH	5±2
Density /(g/cm³)	1.05±0.05(25ºC)
chlorine ion content	0
ASTM C 494:	G
Standard compliance: ASTM C 494, Type E, F and G standard for high range water reducer

Fields of application

1. Excellent slump retention: It can effectively inhibit the hydration reaction rate of cement hydration in the initial and induction periods.
2, slow release: the slump retaining agent has the characteristics of low initial water reduction rate and high later water reduction rate. Excellent slow release dispersion for cement.
3. The product is green, non-toxic and harmless, conducive to the configuration of green concrete;
4. The product has excellent adaptability;

usage

1. This product is 50% solid liquid with low water reduction rate, which does not belong to the end product used in concrete production. It is recommended to be combined with polycarboxylic acid water reducing agent, and the recommended composite ratio: mass ratio of carboxylic acid masterbatch and PCE156B =8:2~7:3. The optimum composite ratio should be determined according to the test.
2. When the user uses this product for the first time or replaces the raw materials, please refer to this instruction manual according to the construction requirements and conditions, and do the necessary trial mixing test on the dosage and method to obtain the best technical and economic benefits;
3. This product can not be mixed with nano superplasticizer, mixed packaging, so as not to affect the performance.

Packaging 

200kg DRUM/1000KG IBC

storage condition

1. This product is transported in plastic drums or tankers, and can also be packaged in special ways according to customer requirements;
2. This product is non-toxic and non-combustible;
3. The product should be stored in a cool place, should avoid contact with steel products for a long time, should be covered storage, should avoid sun, rain and freezing, storage temperature should be between 0-40ºC, below 0ºC will freeze when stored, if found to be frozen can be heated until it melts and stirred again before use;
4. The shelf life of this product is six months. If the shelf life exceeds the warranty period, it can be continued to use after the technical index has passed the inspection and the performance index has met the requirements through the concrete test.

product safety

According to the law on dangerous goods, manufactured goods, this product is harmless. Contact us for more information.

General

Safety
The  usual  safety  precautions  when  handling  chemicals  must  be  observed.  These  include  the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles.

Material Safety Data
Sheet
Transport Regulation

All safety information is provided in the Material Safety Data Sheet for Polycarboxylate superplasticizer.

Not known as a dangerous good according to transport regulations.

Important
The  descriptions,  designs,  and  data  contained  herein  are  presented  for  your  guidance  only. Because there are many factors under your control which may affect processing or application/use it is necessary for you to make appropriate tests to determine whether the product is suitable for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,   INCLUDING   WARRANTIES    OF    MERCHANTABILITY    OR    FITNESS   FOR   A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, OR INFORMATION SET FORTH,   OR THAT THE PRODUCTS, DESIGNS, OR DATA   MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, DATA OR DESIGNS PROVIDED BE PRESUMED TO BE A PART OF OUR TERMS AND CONDITIONS OF SALE. Further, you expressly understand and agree that the descriptions, designs, and data furnished by SIDLEYCHEM hereunder are given gratis and BASF assumes no obligation or liability for same or results obtained from use thereof, all such being given to you and accepted by you at your risk.
© Sidley Chemical Co.,Ltd, 2023