Customization: | Available |
---|---|
Specific Usage: | Technical Grade |
Usage: | Laboratory Reagents |
Still deciding? Get samples of US$ 0/Bag
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
SMF-10 is a Sulphonated Melamine Formaldehyde Resin Based Superplasticizer, suitable for cement-based or gypsum-based mortars that require high fluidity and high strength.
Range of Application
SMF-10 has good compatibility with different cements, gypsum cementing materials and other additives such as defoamers, thickeners, retarders, expansion agents, hardening accelerators, etc., and can give mortars quick plasticization, high fluidization effect and low air entrainment.
Recommended Application:
Flowable mortar for pouring
Flowable mortar for paving
Flowable mortar for painting
Fluid mortar for pumping
Steam curing concrete
Other dry mix mortar or concrete
Method of Use
Package into finished products after mixing with other dry powder components evenly, and use it after mixing with the recommended amount of water on site.
The recommended addition amount is 0.3-1.00% of the cementitious material, which needs to be determined in advance based on raw materials and construction specifications.
Physicochemical Property
Project | Indicator |
appearance | white powder, free flowing |
bulk density | 400-700kg/m3 |
moisture content | ≤5.0% |
20% solution PH value 20ºC | 7.0-8.0 |
chloride ion content | ≤ 0.05% |
air content of concrete | ≤ 3.0% |
concrete water reduction rate | ≥14% |
Packing Specification Packed in plastic woven bag, 25 kg/bag. Storage Conditions The product should be stored in a dry and clean environment in the original packaging and away from heat sources. This product is not easy to fail, but it is a hydrophilic-based product. If the storage environment is poor, it will slowly absorb water. It is recommended to follow the first-in first-out principle when using it. If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion. Product Safety According to laws and regulations on dangerous goods and preparations, this product is harmless. The formation and accumulation of dust should be avoided. Scattered products should be cleaned up in a dry state. There is a risk of slipping when contacted with water. For detailed information, please contact us. About UsSIDLEYCHEM has focused on the application development and product promotion of construction chemicals such as mortars and coating additives for many years. To provide customers with professional, customized one-stop product supply services and systemized solutions. At present, it has formed fields covering mortar, paint and daily chemicals. CapacitySIDLEYCHEM has the production base in Shandong, China with an annual production capacity of 15,000MT of MC (HPMC/MHEC); 5000 MT of HEC; 10000MT of RDP; 10000MT of PAC for oildrilling; 15000MT of Calcium Formate/Sodium Formate/Potassium Formate etc. ServicesAs one of the best suppliers of mortar additives in China, Sidleychem has its own technology center to assist customers in product analysis, product development, formulation optimization and more. At the same time providing the most competitive products, providing customers with the best customized service is our goal. Advantage
|
|