Hot Sales Concrete Fiber Polyvinyl Alcohol Fiber PVAF-ECC12 for Shotcrete, Underground Engineering, Water Conservancy Engineering, Self-Compacting Concrete

• Customization: Available
• Application: Construction
• Bonding Strength: /
• Model NO.: PVAF-ECC12
• Setting Time: /
• Type: Concrete Fiber
• Transport Package: P. P. Bag
• Specification: 180kg net (1000*550*600mm)
• Trademark: sidleychem
• Origin: China
• Production Capacity: 600ton/Month

Product Description

Synthetic Fiber
Polyvinyl Alcohol Fiber
(PVAF-ECC12)

 

Chemical Nature

As the reinforced material for cement, PVAF-ECC12 has the good performance of bending strength, impact resistance, as the fiber itself has the properties of chemical resistance and alkali resistance etc., it is harmless to human and environment, is an ideal replacement of asbestos.  

By using of PVAF-ECC12 in concrete, the workability (slump and expansion) of concrete and the influence of bubble effect can be reduced. The workability of concrete can be ensured by optimizing the aggregate gradation, adjusting the dosage of water reducer and selecting the appropriate fiber length and content.    
 

Typical Properties

 

Grades	Unit	PVAF-ECC12
Diameter	μm	37~40
Density	g/cm3	1.28-1.30
Tenacity	CN/dtex (MPa)	≥1036
Elongation	%	5.0~11.0
E-Modulus	GPa	≥ 24.6
Hot water solubility (90ºC,1hr)	%	≤2.5
Visual classification of dispersion(3 classes)	3 classes	1~3
Cutting Length	mm	12

Feature of application

PPVAF-ECC12 is specially used in ECC product system, with thicker diameter and more toughness. It can be used in shotcrete, underground engineering, water conservancy engineering, self-compacting concrete, with high toughness in hardened state and the advantages of self-vibrating and self-compacting.

1, PVA fiber as reinforcing material, can obtain the tensile strain - hardening characteristics. pva-ECC is characterized by high toughness, its ultimate tensile strain is greater than 3%, and saturation state of multi-point cracking.

2, ECC as a repair material, with high strength, good ductility, energy absorption and good resistance to cracking, in the reinforcement transformation can replace the use of reinforcing steel, thus simplifying the construction and reduce costs

3, Improve the performance of freeze-thaw cycle resistance.

4, with anti-wear, can reduce the road surface and other concrete surface dust spalling weathering.
 

Usage

The recommended additive amount of PVA fiber used for fiber cement products is 1.0%-2.0%, The optimal length is 6mm or 12mm, with which it can effectively increase the strength of the fiber cement products. PVAF-ECC12 is regarded as the most optimal environment-friendly and green material that can replace the asbestos.

According to the formulation design, add PVAF-ECC12 into water, stir to make it pre-dispersed, then add the fiber cement to the mixing tank and stir with other materials until the end of the production

 

Packaging

P.P. bag, 180kg net weight (1000×550×600mm)
12.96T/20'FCL Container

 

Storage condition

 Keep away from heat or ignition sources.
 Don't store near strong oxidising agent (halogen, peroxide, etc)
 

Product safety

According to the legal provisions on dangerous goods and preparations, this product is non-hazardous. Not harmful to health or environment under normal use of product. If material is heated up, may cause burns.
 

General

The  usual  safety  precautions  when  handling  chemicals  must  be  observed.  These  include  the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles.
 

Material Safety Data Sheet

All safety information is provided in the Material Safety Data Sheet for Polyvinyl Alcohol Fiber
 

Transport Regulation

Not known as a dangerous good according to transport regulations.

 

 

Company Profile
 

SIDLEYCHEM has extensive experience in the production of concrete admixtures. Wecan adjust the synthesis process according to the customer's needs and provide solutionsfor different materials and climates.

SIDLEYCHEM has a professional concrete laboratory, which can help customers optimizethe proportion of C60/C80/C100 strength concrete, reduce costs and the strength stillmeet the technical requirements of the concrete. SIDLEYCHEM to provide customerswith professional, customized one-stop product supply services and systemized solutions.whatever suits you is the best product.

Belonging to the anionic type,it is a high efficiency water reducing agent with early strength,non air entraining and low chloride ion content.it has excellent workability,which is not easy to sag and can significantly improve the compactness and surface gloss of the material.