Product overview
Melamine superplasticizer is a water-soluble anionic superplasticizer, whose main component is sulfonated melamine formaldehyde resin, which has a strong adsorption and dispersion effect on cement, and is one of the superplasticizers with excellent comprehensive performance in concrete and dry powder mortar.
Product performance
SFM-10P
| appearance |
effective constituent(%) |
moisture content(%) |
pH |
air content(%) |
water-reducing rate(%) |
| white powder |
≥95 |
≤3 |
7~9 |
3~4 |
20-30 |
Product characteristics
1, high water reduction rate, no bleed air; Improve the workability of the newly mixed cement products and improve the segregation stability; Improve early product strength and durability.
2, sulfate ion content is low, chloride ion content is very low, no corrosion of steel bars.
3. Cement adaptability and good compatibility with additives such as redispersible emulsion powder and cellulose ether.
Recommended application
1. SM high efficiency water reducing agent has good dispersion performance to aluminate and good water reducing effect. It can be used for refractory concrete, refractory brick, refractory castable and other refractory materials made of aluminate cement, which can significantly improve the compressive and flexural strength of refractory materials, reduce the wet porosity of refractory materials, and improve the density. To extend the life of the refractory material, the usual dosage is 0.5% to 1.5% of the cement material.
2, SM high efficiency water reducing agent used in self-leveling cement mortar, non-metallic wear-resistant floor, grouting material, improve the constructability of the material, improve the hardness and finish of the floor surface, no cracking.
3. SM superplasticizer is applied to waterproof mortar and waterproof emulsion modifier to improve the impermeability of concrete or mortar.
4,SM high efficiency water reducing agent used in the configuration of high strength concrete, pumped concrete, colored concrete and decorative products, high strength mortar, repair mortar and so on.
Use method
It is mixed with other dry powder components and packaged as finished products. It is mixed with the recommended amount of water on site and then used.
The recommended addition amount is 0.5-1.00% of the cementing material, which needs to be determined by the preliminary test of raw materials and construction specifications.
packing
Powder: Three-layer plastic woven bag, 25kg/bag.
Storage condition
Products should be stored in a dry, clean environment, in their original packaging and away from heat sources. This product is not easy to fail, but it is a hydrophilic product, if the storage environment is poor, it will slowly inhale water, it is recommended to follow the principle of first in first out when using.
If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion.
Product safety
According to the law on dangerous goods, manufactured goods, this product is harmless. Dust formation and accumulation should be avoided. Scattered products should be cleaned in a dry state, there is a risk of slipping in contact with water. Contact us for more information.
Audited Supplier 
){kind=link}