Sodium Lignosulphonate SL-Powder50 Used in Construction Chemicals Manufacturer From China

• Customization: Available
• Type: water-reducing admixture
• After-sales Service: Technical Services
• Model NO.: SL-Powder50
• Transport Package: 25 Kg / 55 Lb Paper Bag
• Specification: 25 kg / 55 lb paper bag
• Trademark: Sidleychem
• Origin: China
• Production Capacity: 5000ton/Year

Product Description

Chemical Nature

 

Sodium lignosulfonate is a modified product of natural lignin. It is yellowish-brown fine powder, slightly aromatic, non-toxic and harmless, and has high chemical stability. As a superplasticizer with naphthalene series, melamine resin superplasticizer has good compatibility, and the aqueous solution does not precipitate.
 

Typical Properties

Properties

appearance	Tawny powder
content	≥50
Water content	≤5.0%
pH	9.5±0.5
water insoluble	≤ 3.0%
reduzate	4.0%
Calcium and magnesium content	≤0.50%

Fields of application

1. The recommended mixing amount is 0.2-0.3% of the cement content (the user can determine the best mixing amount by test), and the water reduction rate is more than 10%, which can significantly improve the workability of concrete, greatly reduce the initial hydration heat of cement, and no corrosion damage to steel bars.
   2.Good compatibility with naphthalene and melamine resin superplasticizers, and the aqueous solution does not precipitate;
   3. The product is green, non-toxic and harmless;

 

usage

Pre-mixed with other dry powder components, then packaged, and mixed with recommended water on site.
The recommended addition amount is 0.20%-0.30% of the cementing material, which should be determined according to the preliminary test of raw materials and construction specifications before use.

Packaging 

25 kg / 55 lb paper bag

storage condition

Products should be stored in a dry, clean environment, in their original packaging and away from heat sources. This product is not easy to fail, but it is a hydrophilic product, if the storage environment is poor, it will slowly inhale water, it is recommended to follow the principle of first in first out when using. If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion.

product safety

According to the law on dangerous goods, manufactured goods, this product is harmless. Dust formation and accumulation should be avoided. Scattered products should be cleaned in a dry state, there is a risk of slipping in contact with water. Contact us for more information.

General

Safety
The  usual  safety  precautions  when  handling  chemicals  must  be  observed.  These  include  the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles.

Material Safety Data
Sheet
Transport Regulation

Not known as a dangerous good according to transport regulations.