| Customization: | Available |
|---|---|
| Appearance: | Powder |
| Application: | Concrete Admixture |
|
Still deciding? Get samples of US$ 1/Bag
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Chemical Nature |
PCE128 It is a polycarboxylic acid superplasticizer powder made by high temperature powder spraying process, with ultra-high water reducing effect, suitable for cement-based mortar or ready-mixed concrete with high fluidity and high strength requirements. |
||||||||||||||
Typical Properties |
Properties
|
||||||||||||||
Fields of application |
1.PCE128 can make the water reduction rate of mortar reach more than 25%, and greatly improve the fluidity of mortar when the mortar is the same water. 2, the product has a wide adaptability, suitable for most mortar and concrete products, can be widely used in a variety of mortar (such as grouting material, support mortar and other materials). Improve slurry flow, easy construction, improve construction efficiency; 4. The product is green, non-toxic and harmless; 5.PCE-128 has excellent matching with other additives such as defoamer, retarder, expansion agent, early strength agent, etc. |
||||||||||||||
| usage | Pre-mixed with other dry powder components, then packaged, and mixed with recommended water on site. The recommended addition amount is 0.01%-0.30% of the cementing material, which should be determined according to the preliminary test of raw materials and construction specifications before use. |
||||||||||||||
| Packaging | 25 kg / 55 lb paper bag |
||||||||||||||
| storage condition | Products should be stored in a dry, clean environment, in their original packaging and away from heat sources. This product is not easy to fail, but it is a hydrophilic product, if the storage environment is poor, it will slowly inhale water, it is recommended to follow the principle of first in first out when using. If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion. | ||||||||||||||
| product safety | According to the law on dangerous goods, manufactured goods, this product is harmless. Dust formation and accumulation should be avoided. Scattered products should be cleaned in a dry state, there is a risk of slipping in contact with water. Contact us for more information. | ||||||||||||||
General |
Safety The usual safety precautions when handling chemicals must be observed. These include the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles. |
||||||||||||||
| Material Safety Data Sheet Transport Regulation |
All safety information is provided in the Material Safety Data Sheet for Polycarboxylate superplasticizer. Not known as a dangerous good according to transport regulations. |
||||||||||||||
){kind=link}