Premium Naphthalene Sulfonate Concrete Water Reducer for Hot Weather

• Customization: Available
• Transport Package: Paper Bag
• Specification: 25 kg / 55 lb paper bag
• Model NO.: SNF-5
• Trademark: sidleychem
• Origin: China
• Production Capacity: 600ton/Month

Product Description

Water Reducing Agent
Naphthalene-based Superplasticizer

Chemical Nature

The naphthalene Superplasticizer has a high water-reducing rate, good fluidity, slight slump loss over time, and no segregation or bleeding. Meanwhile, it can significantly improve the fluidity and strength of concrete at all ages, especially the later stage strength, which has a significant enhancement effect. It is the first choice for admixture for high-strength concrete, commercial concrete, self-leveling grouting materials, and other products.
 

Typical Properties

 

Type	SNF-5	SNF-18
Solid content	≥91	≥91
Sodium sulfate content	≤5%	≤18%
Fluidity of cement slurry	≥200	≥180
Water-reducing rate	≥18	≥16
PH	8±1	8±1
Chloridion	≤0.5	≤0.5

Features of application

1. The product is non-toxic, non-flammable, stable in shape, and has no corrosion effect on steel bars;
2. The air content is 2.5-4.0%, which is conducive to pumping construction;
3. The sodium sulfate content is ≤18%, the alkali content is low, and it will not cause an alkali-aggregate reaction;
4. The water-reducing rate is 12-20%, which can increase the fluidity of the mixture, and the concrete slump reaches 15-20cm; the loss in 60 minutes is ≤20mm, which is suitable for the continuous pouring of large volumes of concrete in hot seasons, reducing hydration heat and reducing the temperature stress of concrete to avoid the occurrence of temperature difference cracks;
5. Increase the compactness of concrete, reduce shrinkage, improve the durability of concrete, and extend its service life.

The outstanding disadvantage of naphthalene-based high-efficiency water-reducing agent is its poor slump retention performance. It can be mixed with retarders (sodium tripolyphosphate, sodium citrate, potassium sodium tartrate, sodium gluconate) to reduce slump loss. It can also be compounded with lignin sulfonate to maintain certain air entrainment and reduce concrete slump loss.

 

Usage

Pre-mix evenly with other dry powder components before packaging. Mix and use on-site according to the recommended amount of water.
The recommended addition amount is 0.01%-0.30% of the cementitious material, which must be pre-tested according to the raw materials and construction specifications before use.

Packaging

25 kg / 55 lb paper bag
 

Storage condition

Store products with original packaging in a dry, clean environment and away from heat sources. This product is not easy to lose efficacy, but it is hydrophilic-based. If the storage environment is poor, it will slowly absorb moisture. It is recommended to follow the first-in-first-out principle when using it. The packaging must be tightly sealed to prevent moisture intrusion if not finished use.

Product safety

According to the legal provisions on dangerous goods and preparations, this product is non-hazardous. Avoid dust formation and accumulation. Scattered effects should be swept up while keeping them dry. Touching with water will cause a risk of slipping. Contact us for further information.

General

The  usual  safety  precautions  when  handling  chemicals  must  be  observed.  These  include  the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles.

Material Safety Data Sheet

All safety information is provided in the Material Safety Data Sheet for Naphthalene-based Superplasticizer.
 

Transport Regulation

Not known as a dangerous good according to transport regulations.

Important
The  descriptions,  designs,  and  data  contained  herein  are  presented  for  your  guidance  only. Because there are many factors under your control which may affect processing or application/use it is necessary for you to make appropriate tests to determine whether the product is suitable for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,   INCLUDING   WARRANTIES    OF    MERCHANTABILITY    OR    FITNESS   FOR   A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, OR INFORMATION SET FORTH,   OR THAT THE PRODUCTS, DESIGNS, OR DATA   MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, DATA OR DESIGNS PROVIDED BE PRESUMED TO BE A PART OF OUR TERMS AND CONDITIONS OF SALE. Further, you expressly understand and agree that the descriptions, designs, and data furnished by SIDLEYCHEM hereunder are given gratis and SIDLEYCHEM assumes no obligation or liability for same or results obtained from use thereof, all such being given to you and accepted by you at your risk.




 

 

Company Profile
 

SIDLEYCHEM has extensive experience in the production of concrete admixtures. Wecan adjust the synthesis process according to the customer's needs and provide solutionsfor different materials and climates.

SIDLEYCHEM has a professional concrete laboratory, which can help customers optimizethe proportion of C60/C80/C100 strength concrete, reduce costs and the strength stillmeet the technical requirements of the concrete. SIDLEYCHEM to provide customerswith professional, customized one-stop product supply services and systemized solutions.whatever suits you is the best product.

Belonging to the anionic type,it is a high efficiency water reducing agent with early strength,non air entraining and low chloride ion content.it has excellent workability,which is not easy to sag and can significantly improve the compactness and surface gloss of the material.