Ideal Water-Reducing Agent Sulfonated Melamine Formaldehyde SMF-10 for Concrete and Dry-Mixed Mortar

• Customization: Available
• Appearance: White Powder
• Application: Concrete Admixture, Grouting Material, Self-Leveling Compound
• Model NO.: SMF-10P
• Setting Time: Rapid Setting Time
• Type: High-range Water-reducing Agent
• Water Reduction Rate: 10%-20%
• Transport Package: Paper Bag
• Specification: 25 kg / 55 lb paper bag
• Trademark: sidleychem
• Origin: China
• Production Capacity: 600ton/Month

Product Description

Water Reducing Agent
Melamine Superplasticizer
SMF-10

Chemical Nature

SMF-10 Melamine water reducer is a water-soluble anionic water-reducing agent. Its main component is sulfonated melamine formaldehyde resin with solid adsorption and dispersion effects on cement, and it has excellent comprehensive performance in concrete and dry-mixed mortar.

Typical Properties

 

Appearance	white powder
Bulk Density	400-700kg/m3
Moisture Content	≤5.0%
20% Liquid Ph Value	7.0-9.0
Fluidity of cement paste	≥ 220mm
Water-Reducing Rate For Drymortar	≥14%

Features of application

1. High water-reducing rate and no air entrainment; improve the workability of fresh cement products and segregation stability; improve the early strength and durability of the product.
2. There is low sulfate, extremely low chloride ions, and no corrosion to steel bars.
3. Cement adaptability and compatibility with redispersible polymer powder, cellulose ether, and other additives.

Applications             

1. SMF-10 Melamine water reducer has good dispersion properties for aluminate and a good water-reducing effect. It can be used in refractory concrete, bricks, refractory castables, and other aluminate materials to significantly improve refractory materials' resistance. It can enhance the compressive and flexural strength, reduce the moisture porosity of refractory materials, increase the density, and extend the life of refractory materials.
2. SMF-10 Melamine water reducer  is used in self-leveling cement mortar, non-metallic wear-resistant floors, and grouting materials to improve the workability of the materials, increase the hardness and smoothness of the floor surface, and prevent cracks.
3. SMF-10 Melamine water reducer  is used in waterproof mortar and emulsion modifiers to improve the impermeability of concrete or mortar.
4. SMF-10 Melamine water reducer  prepares high-strength concrete, pumped concrete, colored concrete, decorative products, high-strength mortar, and repair mortar.

Usage

Pre-mix evenly with other dry powder components before packaging. Mix and use on-site according to the recommended amount of water.
The recommended addition amount is 0.5%-1.5% of the cementitious material, which must be pre-tested according to the raw materials and construction specifications before use.
 

Packaging

25 kg / 55 lb paper bag
 

Storage condition

Store products with original packaging in a dry, clean environment and away from heat sources. This product is not easy to lose efficacy, but it is hydrophilic-based. If the storage environment is poor, it will slowly absorb moisture. It is recommended to follow the first-in-first-out principle when using it. The packaging must be tightly sealed to prevent moisture intrusion if not finished use.

Product safety

According to the legal provisions on dangerous goods and preparations, this product is non-hazardous. Avoid dust formation and accumulation. Scattered effects should be swept up while keeping them dry. Touching with water will cause a risk of slipping. Contact us for further information.
 

General

The  usual  safety  precautions  when  handling  chemicals  must  be  observed.  These  include  the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles.
 

Material Safety Data
Sheet

All safety information is provided in the Material Safety Data Sheet for Melamine Superplasticizer

Transport Regulation

Not known as a dangerous good according to transport regulations.

Important

The  descriptions,  designs,  and  data  contained  herein  are  presented  for  your  guidance  only. Because there are many factors under your control which may affect processing or application/use it is necessary for you to make appropriate tests to determine whether the product is suitable for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,   INCLUDING   WARRANTIES    OF    MERCHANTABILITY    OR    FITNESS   FOR   A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, OR INFORMATION SET FORTH,   OR THAT THE PRODUCTS, DESIGNS, OR DATA   MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, DATA OR DESIGNS PROVIDED BE PRESUMED TO BE A PART OF OUR TERMS AND CONDITIONS OF SALE. Further, you expressly understand and agree that the descriptions, designs, and data furnished by SIDLEYCHEM hereunder are given gratis and SIDLEYCHEM assumes no obligation or liability for same or results obtained from use thereof, all such being given to you and accepted by you at your risk.




 

Company Profile
 

SIDLEYCHEM has extensive experience in the production of concrete admixtures. Wecan adjust the synthesis process according to the customer's needs and provide solutionsfor different materials and climates.

SIDLEYCHEM has a professional concrete laboratory, which can help customers optimizethe proportion of C60/C80/C100 strength concrete, reduce costs and the strength stillmeet the technical requirements of the concrete. SIDLEYCHEM to provide customerswith professional, customized one-stop product supply services and systemized solutions.whatever suits you is the best product.

Belonging to the anionic type,it is a high efficiency water reducing agent with early strength,non air entraining and low chloride ion content.it has excellent workability,which is not easy to sag and can significantly improve the compactness and surface gloss of the material.