Premium Water Reducing Agent PCE-128 Superplasticizer Integrates High Water Reduction

• Customization: Available
• Appearance: Powder
• Application: Concrete Admixture, Grouting Material
• Model NO.: PCE-128
• Chemical Composition: Polycarboxylate-based Water Reducers
• Setting Time: Rapid Setting Time
• Type: Ultra-high-range Water-reducing Agent
• Water Reduction Rate: 40%-50%
• Transport Package: Plastic Bag
• Specification: 25 kg/bag
• Trademark: sidleychem
• Origin: China
• HS Code: 3824401000
• Production Capacity: 600ton/Month

Product Description

POWDER
Polycarboxylate Superplasticizer
PCE-128

Chemical Nature

PCE128 is a polycarboxylate water-reducing agent powder produced through a high-temperature powder spraying process. It has an ultra-high water-reducing effect and is suitable for cement-based mortar or ready-mixed concrete with high fluidity and strength requirements.
 

Typical Properties

 

Appearance	white powder
Bulk Density	400-700kg/m3
Moisture Content	≤5.0%
20% Liquid Ph Value	7.0-9.0
Chlorine Ion Content	≤ 0.05%
Water-Reducing Rate For Concrete	≥25%

Features of application

1. PCE128 can make the water-reducing rate of mortar reach more than 25%, which significantly improves the fluidity of mortar when the same amount of water is added.
2. The product has wide adaptability and is suitable for most mortars and concrete products. It can be widely used in various mortars (such as grouting materials, bearing mortars, and other materials). Improve the fluidity of mortar slurry, facilitate construction, and improve construction efficiency;
3. The product is environmental protection, non-toxic and harmless;
4. PCE-128 is compatible with other external additives such as a defoamer, retarder, expansion agent, early strength agent, etc.
 

Usage

Pre-mix evenly with other dry powder components before packaging. Mix and use on-site according to the recommended amount of water.
The recommended addition amount is 0.01%-0.30% of the cementitious material, which must be pre-tested according to the raw materials and construction specifications before use.
 

Packaging

25 kg / 55 lb paper bag

 

Storage condition

Store products with original packaging in a dry, clean environment and away from heat sources. This product is not easy to lose efficacy, but it is hydrophilic-based. If the storage environment is poor, it will slowly absorb moisture. It is recommended to follow the first-in-first-out principle when using it. The packaging must be tightly sealed to prevent moisture intrusion if not finished use.
 

Product safety

According to the legal provisions on dangerous goods and preparations, this product is non-hazardous. Avoid dust formation and accumulation. Scattered effects should be swept up while keeping them dry. Touching with water will cause a risk of slipping. Contact us for further information.
 

General

The  usual  safety  precautions  when  handling  chemicals  must  be  observed.  These  include  the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles.
 

Material Safety Data Sheet

All safety information is provided in the Material Safety Data Sheet for Polycarboxylate superplasticizer.
 

Transport Regulation

Not known as a dangerous good according to transport regulations.
 

Important

The  descriptions,  designs,  and  data  contained  herein  are  presented  for  your  guidance  only. Because there are many factors under your control which may affect processing or application/use it is necessary for you to make appropriate tests to determine whether the product is suitable for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,   INCLUDING   WARRANTIES    OF    MERCHANTABILITY    OR    FITNESS   FOR   A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, OR INFORMATION SET FORTH,   OR THAT THE PRODUCTS, DESIGNS, OR DATA   MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, DATA OR DESIGNS PROVIDED BE PRESUMED TO BE A PART OF OUR TERMS AND CONDITIONS OF SALE. Further, you expressly understand and agree that the descriptions, designs, and data furnished by SIDLEYCHEM hereunder are given gratis and SIDLEYCHEM assumes no obligation or liability for same or results obtained from use thereof, all such being given to you and accepted by you at your risk.

 

 

Company Profile
 

SIDLEYCHEM has extensive experience in the production of concrete admixtures. Wecan adjust the synthesis process according to the customer's needs and provide solutionsfor different materials and climates.

SIDLEYCHEM has a professional concrete laboratory, which can help customers optimizethe proportion of C60/C80/C100 strength concrete, reduce costs and the strength stillmeet the technical requirements of the concrete. SIDLEYCHEM to provide customerswith professional, customized one-stop product supply services and systemized solutions.whatever suits you is the best product.

Belonging to the anionic type,it is a high efficiency water reducing agent with early strength,non air entraining and low chloride ion content.it has excellent workability,which is not easy to sag and can significantly improve the compactness and surface gloss of the material.